Monday, December 4

Russian 4.3inch 1080P Dual Lens Car DVR Two Camera Blue Mirror Full HD H.264 140 Angle View Separated Rear camera Gsensor H236


Best Cycling High Rating Product provide dvr 1080p, dvr edit, dvr analog Hot Flash Deal Russian 4.3inch 1080P Dual Lens Car DVR Two Camera Blue Mirror Full HD H.264 140 Angle View Separated Rear camera Gsensor H236. Get 10% discount Now! Now US $59.22/piece. Hurry buy Now before back to normal price! Normal price US $65.80. Dont waste your time. Buy Now only in Meibo Technology CO.,LTD Trusted Seller Store!

4.3inch LCD+ Blue Mirror Design+ FHD 1080P+ 140degree Angle View+ Separated Rear camera(included)

Type

Blue Mirror Rear view car dvr

Video Processor

Allwinner A20

Display

4.3 inch HD LCD screen

Mirror

Blue Color Mirror to avoid Day-Night

Camera Lens

Front 5.0MP CMOS lens; 140 degree Wide Angle view

Rear separated camera lens (included ) , 120 degree Wide Angle View.

Video specifications

1920*1080p, 1280* 720p, VGA

Video compression

H.264 MOV

Loop recording

support seamless loop video recording

Motion detection

support

Vioce record

support Synchronous vioce record

G-Sensor

3D triaxial collision detection

Battery

High-quality built in rechargerable battery

TF card

maxium 32GB TF card (not included)

Connection

USB 2.0/HDMI/AV out

Video Locking

Support Video Locking/ Unlocking

Screensavers

Support

Auto ON/OFF

Support

Package included

Car charger, Buckle, Separated Rear Camera with around 6 meters Cable(included)., USB Cable, User ManualManual:

Thank you for purchasing the Multi-function DVR from our company. This product uses the high performance chip and offers the high-definition video. The continuity of its dynamic pictures is very good. It can record video under low illumination and realize the high-definition and 140° large angular transformation recording.

This instruction manual will instruct you how to use detailedly,and provide you with detailed information,Including the using ,operation and technical specifications, etc. Please read this manual carefully before using and fully understood, please properly preserve the manual, we hope that our products can meet your needs and we can serve you for a long time!

Appearance and Button Function Description

The Button schematic:

Button Features:

1. Power / Flash Light

Function One;Start/ Shutdown

In shutdown mode, press the power button for 3 seconds to start the machine, the machine will start to work automatically. When power on press the power button for 3 seconds then the machine will save the video file and turn it off automatically.

Function Two;Flash Light

In standby mode, touch the POWER button to start/close the flash light /or enter into the automatic mode. In automatic mode, the flash light is controlled by the camera light’s brightness and darkness.

2. Photograph / Playback/ Menu /emergency locked

Function One;Photograph

In standby mode, press the MODE button shortly to enter into the photograph mode,then press the OK button and you can take a picture.

Function Two;Playback

When power on, press the MODE button twice to enter into the file playback mode. Press the PAGE UP or PAGE DOWN button shortly you can choose the file you need to playback, then press OK and the recorded file will play. If you want to exit press the MODE button.

Function Three;Menu Setting

In standby mode,,press the MODE button to enter into the main menu for setting.press the PAGE UP/PAGE DOWN button to choose the option you need to set,then press the OK button to confirm. Press the MENU button after setting until it exits the setting menu interface .The setting way is apply to recording mode. Photograph mode .playback mode as well.

Function Four;Emergency locked

In video mode, if the vehicle is clashed, press the MODE button shortly to start the emergency locked function. Then the time of the accident in the first 10 seconds and after 20 seconds will be saved to a special file, and the file will be not covered circularly.

3. PAGE UP/ CAMERA SWITCHING

Function One;Page Up

It is capable of page-up capability in menu Setting and playback mode.

Function Two;Camera Switching

After joining up the external camera, the bottom of the screen will appear a camera icon which means that it has identified the analog camera, press the PAGE UP button shortly it can switch among the former cameraback camera PIP and split-screen display four ways.

4. PAGE DOWN /MUTE/MOTION DETECTING

Function One;Page Down

It is capable of page-down capability in menu Setting and playback mode.

Function Two: Close Recording

In video mode, press the PAGE DOWN button shortly to close the recording, the bottom right of the screen will appear the forbidden Microphone icon. Press again, it recovers recording and the forbidden icon will disappear.

Function Three;Motion Detection

In standby mode, press the PAGE DOWN button for a moment to switch to the motion detecting mode. Press the PAGE DOWN button to exit the motion detecting mode when not recording.

5,VIDEO/OK/ DISPLAY BACKLIGHT

Function One;Start recording

In standby mode, press the VIDEO button shortly to enter into video mode, press again the VIDEO button to stop videoing.

Function TWO: OK

In standby mode/photograph mode /playback mode, touch the MODE for 3 seconds to enter into the main menu mode, touch the PAGE UP or PAGE DOWN to browse, touch the VIDEO button to make sure your choice.

Function Three;Display Backlight.

When power on press the VIDEO button for a moment to close the display backlight. Press any button to restore the display backlight.(This operation only works on display backlight, does not affect videoing.)

6,RES

If the machine crashed, press the RES button shortly to restart the machine.

Operation Instruction

Installation:

1. Close the car engine.

2. Insert the TF card to the recorder card slot.

Warming;Please use the higher class TF card (Class6 above), the capacity of the card is not less than 512 MB and maximum capacity is 64GB.

3. Fixed the recorder in the rearview mirror of the car.

4. Insert the car charger to the car cigarette lighter.

5. Use the car charging extension cord to connect the recorder USB port with the car charger.

'Warming;The charging extension cord can be run up along the edge of the windscreen.

6. Install the back camera to the rear of the car, pay attention to the direction when installing. Wiring can be run along the vehicle roof. After installation, connect the back camera with the recorder port which set for back camera.

7. Adjust the camera position to make sure the camera keep parallel with the ground.

8. Start the engine and check whether the machine is installed correctly.

;Warming;When the machine is installed correctly, the recorder enter into recording state, please check if the display screen is normal, such as display images of inverted image, please do not hesitate to contact us.

Functional Description

1, Automatic Recording

Start the car engine, the recorder will start and record automatically, turn off the car engine, the recorder will save recorded contents and turn off automatically .the video file save on the TF card partly. When the TF card is full, it will cover the earlier video file automatically.

Warming

a. Recorded time can be set in menu settings, you can set1/2/5 minutes duration for videoing.

b. The former and back camera video files are saved in folder DCIMA and DCIMB apart in the TF card. Normal folder is for NORMAL, locked folder is for LOCK.

2 Manual Recording

Press the POWER button for 3 seconds to start the machine and it will start to video automatically. When power on press the POWER button for 3 seconds again then the machine will save the video file and turn it off automatically.

3. Photograph

When power on press the MODE button shortly to enter into the photograph mode,then the video icon will transform into the camera icon. Press the OK button and you can take a picture .Press the MODE button twice you can video again.

4. Motion Detection

In standby mode, press the PAGE DOWN button for a moment to switch to the motion detecting mode. When the camera would not feel the object moving for 5 seconds, the system will stop videoing. If you want to exit the motion detecting mode when not recording, press the PAGE DOWN button for 3 seconds.

. Warming

This setting will not be saved, it will restore to the video mode next time you start.

5. Collision Induction

In video mode, if it takes place the vehicle collision, short press the menu button to start the emergency locked function. Then the time of the accident in the first 10 seconds and after 20 seconds will be saved to a special file, and the file will not be covered circularly.

G–sensor is built in the machine. If it takes place the serious vehicle collision the recorder will save the video of the accident in the first 10 seconds and after 20 seconds to a special file and the file will not covered circularly. At the same time the bottom left of the screen will appear the locked icon.

Warming

1. The locked video file was begun with ZW and the common file was begun with AW.

2. G-sensor can support sensitivity adjustment; you can set your option according to your actual needs.

6. Locked

The machine have the locked function, you can lock the video file you need to keep without be covered circularly .In video mode, press the MODE button the recorder will lock the video of the time in the first 10 seconds and after 20 seconds.

7. Date and Time Setting

In standby mode, press the MODE button to enter into the system menu for setting. Settings menu short according to turn down/set the cursor movement to date options short press OK key to confirm, enter the Settings menu settings.

Warming

In order to record the date and time of the safety accident of forensics effectively, please set the correct time before using this machine.

8. MUTE

In video mode, press the MUTE button to close the recording when videoing and the bottom left of the screen will appear the forbidden Microphone icon. At this time the recorder is just videoing without recording Press again, it recovers recording and the forbidden icon will disappear.

9,USB Flash Disk

Use the data cable to connect the recorder to the computer USB then the screen will appear three

Modes that are Disk,Camera and Charging. Press the PAGE UP/PAGE DOWN button to choose disk options, press the OK button to enter into USB mode.

Warming

When using computer to copy video file, it is recommended to use card reader to copy.

10. Video File Playback

When power on, press the MODE button twice to enter into the file playback mode. Press the PAGE UP or PAGE DOWN button shortly you can choose the file you need to playback, then press OK and the recorded file will play. If you want to exit press the MODE button again.

11. Reversing Visual

Firstly, it is necessary to connect the car charger with the recorder then connect the RVB of back drawing camera with the car light.

When connect the car charger with the recorder, the machine will start videoing automatically. In any state switch R gears the screen will switch to the rearview mirror automatically and shows reverse images .after reversing visual machine automatically. It will return to video mode after backing up.

Warming;Backing up in the photo mode, it will return to photo mode automatically after backing up.

NEW update manual :

Thanks for purchasing our products, this product is equipped with All winner A20 chipset, high definition CMOS sensor, 120 degrees low illumination lens.

This manual is provided to help you getting good command of product, it will show you how to operate and the specification list of product. Before using this product, please read this manual very carefully and keep it properly. Hope you will like this product and then we can build long term business relationship in the near future.

Product structure:

II. Button Functions

01: Power ON/OFF, LED light on/off

02: Photo/Replay/Menu/Emergent lock button

03: UP/Lens switch

04: Down/MIC/Motion detect

05: Record/OK/Backlight ON/OFF

07: GPS port (optional)

08: TF card slot

09: AV IN/back lens port

10: USB port

11: 4.3 inch Screen

12: Lens

13: Loud speaker

14: Car bracket

III. Operation Instructions

1.Power ON/OFF button:

Power on/off the DVR: Keep pressing 3 seconds to power on/off the DVR, it will enter into the recording mode automatically. Meanwhile the DVR will read the TF card, the big capacity card will takes more time to get read. Keep pressing again the Power ON/OFF button, the recording will be stopped and the video files get saved.

Power ON/OFF back light: After the DVR powered on, slightly press the Power ON/OFF button to choose: LED light on/off/auto; in the mode of LED light auto, the LED light is controlled by photoconductive resistance or the brightness of light sensed by the camera lens.

2. Photo/Replay(Modes switch)/Menu/Emergent lock button:

Photo function: In the standby mode, slightly press this button to enter into the photo mode, press OK button to take photos.

Replay function: In the standby mode, press this button twice to enter into the mode of replay. Press UP/Down button the scan the files which you have recorded and press OK button to choose open the file or pause. Press Modes switch button to exit this mode.

Menu function: In the standby mode, keep pressing this button for 3 seconds to enter into the Menu settings, press UP/Down to choose setting your DVR accordingly: you will see Resolution, White balance, Exposure, Color, Time stamp, Language option, Frequency, LED light, Keypad tone, Format, System info, Reset to Default, press OK to enter in, press Menu to exit the settings.

Emergent lock function: In the video mode, when the Car is in emergent situations, slightly press this button, the DVR will save the video file which is started from 10 seconds before the accidents and ended 20 seconds after the accidents and will not be covered by circle recording.

3. UP/Lens switch button:

Page Up function: when in the mode of Menu or Replay, press this button to scan up sub- menu or video files accordingly.

Lens Switch function: When the back lens had been plugged into the DVR, the LCD screen will appear a icon which shows it has been well connected. Press this button to switch screen display as below:

1, Front lens, 2, Back lens, 3, Picture in picture, 4, Split screen.

4. Down/MIC/Motion detect button:

Page Down function: when in the mode of Menu or Replay, press this button to scan down sub- menu or video files accordingly.

One press to record voice: In the video mode, press this button to choose whether to record with voice or not, also the LCD screen will appear the icon of voice accordingly.

Motion detect function: In the standby mode, keep pressing this button for 3 seconds to turn on the motion detect function, keep pressing 3 seconds to turn off this function, the LCD will show icon on the top left corner which means you was in the motion detect mode.

5. Record/OK/LCD back light ON/OFF button:

Press to record: In the stand by mode, press this button to record videos or take photos, press again the button to stop the recording and the video file will be saved.

OK function: In the mode of Menu/Replay, press this button to choose OK.

Back light ON/OFF: Keep pressing 3 seconds to turn off the backlight, then press any buttons to turn on the backlight.

6. Reset button: Choose to restart the DVR when it is crashed.

7. Time&Date update function:

When the DVR is in the video mode, press Menu button to find the System Menu, press Down/Up button to select “Time Set”, press OK/Emergent button to choose OK, press Menu button to set Year, Month, Date, Hour, Min, Sec; press Down/Up to set correct time&date; press OK/Emergent button to save, also it will back to the video standby mode.

8. Circle recording and seamless recording function:

In the Menu mode, find out circle recording then choose 1 min, 2mins, 5mins as each video time or Close the circle recording. The circle recording support seamless recording function.

9. Low battery warning:

When the DVR detected the low battery, the LCD screen will appear icon of low battery, the DVR will be powered off within 6-13 seconds and the file will be saved automatically.

10.U Disk/Webcam/Charging mode:

When the DVR had been plugged into the PC by USB cable, the DVR screen will appear 3 option for your choice, press Down/Up button to choose which mode you want to enter into. After choosing well, the LCD of DVR will appear icons of U Disk/ Webcam/ Charging respectively.

11. G-Sensor function:

The G-Sensor function can measure the gravitational acceleration of DVR, sense the vibration between cars when they are crashing. Meanwhile, the DVR will save the video file which is started from 10 seconds before the accidents and ended 20 seconds after the accidents and will not be covered by circle recording.

12. About the TF card: when you connect the TF card to the PC, you will see below folders:

DCIMA: the videos recording by front lens;

DCIMB: the videos recording by back lens;

Normal: normal videos recording during the driving;

Lock: videos record by pressing Emergent lock button or G-sensor function.

Specification list:

Image sensor Samsung 4AW

Front lens 140 degrees

Front lens Resolution HD(1280*720)/30fps

1920*1080

Back lens H.264MOV

720*576/30fps

Back lens motion detect Support

Picture in picture Support

Photo format JPEG

Photo resolution HD 2048X1536

Screen size 4.3 inch TFT

Seamless recording Support

Night vision Support/optional

Motion detect Support

Circle recording Support

Voice recording Support

G-Senor Support

Emergent G-Sensor Support

Video chatting Webcam

Stock temperature -20~60

Operating temperature -10~60

Operating humidity 15—65%RH

Support card TF card

Support TF card 512MB~64GB

Battery 600mAH

Recording time 1-1.5 hours

Consumption current 400MA~600MA

DC in DC5V

1.Accessories:

1, DVR 2. Rubber 3.Manual 4.Car charger

5.USB cable 6. Color box 7.Rear Lens

If you have any question, please free feel to contact us.

Remark: we suggest the customers to use TF card superior than class 6.


Return Policy

If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.

Seller Service

On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).
Fast Flash Deal Russian 4.3inch 1080P Dual Lens Car DVR Two Camera Blue Mirror Full HD H.264 140 Angle View Separated Rear camera Gsensor H236

No comments:

Post a Comment